Worldwide Pipe Meets Industry Standards
There are different types of pipe fittings on sale like, buttweld pipe fittings, malleable iron pipe fittings, high pressure forged steel fitting, grooved pipe fitting, threaded carbon steel pipe fittings and ductile iron fitting. For the same type, there also will be lots of different parts. Like elbow, tee, cap, reducer, bushing, socket, plug, nipple, threaded pipe fitting, grooved fitting, grooved coupling and adaptor. So make sure you are buying the right product.
1. The cold and hot water outlets of the drainage pipes must be level, generally the left side is hot and the right side is cool, and the piping should be laid horizontally and straight. The layout should be safe and reasonable. The position of the pipe clamp and the slope of the pipe shall meet the requirements of the specification. All types of valves should be installed in the correct position and level for easy use and maintenance. 2. The water inlet should be equipped with an indoor main valve. Before installation, check whether the water pipes and connecting accessories are damaged or cracked. 3. The distance between the water meter and the valve from the wall should be appropriate, and it should be convenient for use and maintenance.
SHORT VS LONG RADIUS ELBOWThe center to face distance of a long radius pipe elbow is always 1.5 times the nominal pipe size, whereas, for a short radius pipe elbow, the center to face distance is equal to the nominal pipe size.Example:For a 4 inches long radius (LR) butt weld elbow, the center to fa
BUTTWELD ELBOW 45/90/180 DEG.ASME B16.9 buttweld elbows are manufactured in a wide range of dimensions (combinations of outside diameter and wall thickness) to fit ASME B36.10 and ASME B36.19 carbon, alloy and stainless steel pipes of any size between 2 and 48 inches (and above).Buttweld elbows belo
Forged fittings are used for piping systems below 2 or 4 inches in diameter (4″ for 2000#/3000# fittings, 2″ for 6000#/9000# fittings), whereas buttweld fittings are used for larger diameter piping.The two main types of forged fittings are the so-called socket weld fittings (which are connected to
Buttweld fitting is a weldable pipe fitting that allows for change of direction of flow, to branch off, reduce pipe size or attach auxiliary equipment. Forged Steel buttweld fittings are manufactured in accordance with ANSI / ASME B16.9.Butt weld fittings are available as elbows, tees, caps, reduces