Product knowledge

• CAST STEEL GATE VALVE

  The cast steel gate valves are manufactured according to API, ANSI, ASME standard, for industrial applications. The features of these cast steel gate valves are: outside screw and yoke, bolted bonnet, flexible or solid wedge, rising stem with top sealing. Standard materials are A216WCB/F6, other mat

  Product knowledge September 29, 2021
• PIPING MATERIAL GUIDE

  When all the piping specifications have been defined and initial quantities identified by the Material Take-off Group, the piping material engineer is responsible for assembling the requisition packages.The Procurement Department will break the piping requirements into several requisitions, so that

  Product knowledge November 05, 2021
• Forged fittings vs. Buttweld Fittings

  Forged fittings are used for piping systems below 2 or 4 inches in diameter (4″ for 2000#/3000# fittings, 2″ for 6000#/9000# fittings), whereas buttweld fittings are used for larger diameter piping.The two main types of forged fittings are the so-called socket weld fittings (which are connected to

  Product knowledge September 22, 2021
• CORRUGATED SHEETS

  Corrugated panels are manufactured through a cold-form process where they are pressed and then roll formed to create the desired corrugated shape. The corrugations within the steel increase the overall tensile strength, making it resistant to increased impact and weight loads. The steel’s corrugated

  Product knowledge September 06, 2021
• Piping Material Selection

  Design ValuesAllowable stresses for the materials specifications contained in the piping class have been established in line with ANSI/ASME B31.3, Paragraph 302.3.For API 5L Grade B, a distinction has been made between seamless pipe and welded pipe with a weld joint factor E=0.95 (in accordance with

  Product knowledge September 03, 2021
• STEEL ANGLES

  Angle is a shape with two flat surfaces that are perpendicular and provide good resistance to bending in any direction.Angles are one of the most common structural steel shapes and are widely used in structures and construction.They are available both as “equal angles” where both legs are the same s

  Product knowledge September 13, 2021
• FORGED STEEL FITTINGS

  Forged steel fittings are the fittings made by forged steel. The process of manufacturing forged steel fittings include: cutting and heating billets, put pressure on heated billets under dies into desired shape, trimming and shot blasting. Then machine forged blank fittings for net shape and dimensi

  Product knowledge September 15, 2021
• Pipe selection and wall thickness

  Pipe selection and wall thickness

  Product knowledge December 10, 2021
• Calculating the Size/Weight of Structural Steel and Miscellaneous Metals

  Calculating the Size/Weight of Structural Steel and Miscellaneous Metals

  Product knowledge December 03, 2021
• Welded Steel Pipe

  Welded steel pipe is widely used in many industries due to its low production cost, high production efficiency, varieties of specifications and stypes, simple production process.

  Product knowledge November 25, 2021