Product knowledge
- STEEL FLANGESA flange connects piping and components in a piping system by use of bolted connections and gaskets. Most commonly used flanges are weld neck flange, slip on flange, blind flange, socket weld flange, threaded flange and lap joint flange (RTJ Flange). This type of connection in a pipe flange allows fProduct knowledge October 14, 2021
- Method of installation-- Stainless Steel FlangesStainless Steel Flanges will not produce corrosion, pitting, rust, and are not easily worn. Stainless steel is one of the highest-strength metal materials for construction. Because stainless steel has good corrosion resistance, it can make structural components permanently maintain the integrity ofProduct knowledge November 03, 2021
- THREADED FLANGESThreaded flanges, also sometimes referred to as companion flanges / screw flanges / NPT flanges, contain a female NPT thread in the center for connection to male NPT threaded piping. Threaded flanges are common when creating reducing connections. Other thread styles are available for machining, asidProduct knowledge September 08, 2021
- PROCESS INDUSTRY CODES AND STANDARDS OF PIPINGProcess plants designed and constructed to the ASME B31.3 code also rely on the standardization of the components used for piping systems and the method of process plant fabrication and construction. There are numerous standards, many of which are interrelated, and they must be referred and adheredProduct knowledge October 01, 2021
- What is the difference between slip on flange and weld neck flange?The Weld Neck Flange is easily recognizable by the hub that gradually tapers from the bolted connection to the pipe. At the Point of Weld on the Weld Neck it is supplied with a specific bore to mate with the attaching pipe or fitting. This connection is made with a full penetration butt weld, this pProduct knowledge September 01, 2021
- RELIABILITY AND MAINTAINABILITY OF IN-SERVICE PIPELINES NO.2All in-service pipelines encounter deterioration due to environmental effects. The deterioration is a time-dependent process which makes the structural integrity of pipelines a time variant characteristic. Advanced mathematical methods which employ probability theory need to be used for time-dependeProduct knowledge September 10, 2021
- CARBON STEEL THREADED FLANGESThreaded flanges, also sometimes referred to as companion flanges / screw flanges / NPT flanges, contain a female NPT thread in the center for connection to male NPT threaded piping. Threaded flanges are common when creating reducing connections. Other thread styles are available for machining, asidProduct knowledge October 27, 2021
- Methods of Pipes ManufactureMethods of Manufacture.The pipe is manufactured by one of the following processes:Seamless (SMLS) pipe is made by a process that does not involve welding at any stage of production.Welded (WLD) pipe is made using an automatic welding process with no addition of filler during the welding process.HeavProduct knowledge August 27, 2021
- Instrument TubingInstrument TubingTubing is normally small-diameter seamless pipes made of high-strength material like carbon steel, copper, stainless steel, titanium, Hastelloy, Monel, etc. They have higher flexibility compared to piping, therefore require less fitting. They can be bent to form angles and fit in thProduct knowledge October 22, 2021
- LENGTH OF PIPESLengthUnless otherwise indicated in the purchase order, pipe should be supplied in the following lengths:The average length of pipes in one order should be not less than 11.6 m with a minimum of 95% of pipes between 11 and 12.2 m in length.No pipe should be less than 10 m in length.No pipe should beProduct knowledge October 15, 2021