Article List

• STEEL PIPES

  Steel PipeA curved steel pipe supplied with a discharge-regulating device to direct the jet onto the buckets in impulse runners.

  Product knowledge November 19, 2021
• PIPE BENDS

  PIPE BENDSA pipe bend is a generic term to indicate a fittings that changes the direction of the piping system (technically, elbows are pipe bends too but of a standardized type in terms of angle degree and direction). The term “pipe bend” refers to a fitting that offsets the direction of the pipe w

  Product knowledge December 29, 2021
• BUTTWELD TEE

  BUTTWELD TEEEQUAL TEEAn equal tee, otherwise called straight tee, is a buttweld fitting used to branch a pipeline, or any other pipework, at 90 degrees. Equal tee asme b36.19A pipe tee is defined “equal” when the bore size at the run and branch sides have the same diameter. An equal tee is, therefor

  Product knowledge January 05, 2022
• HEAT TREATMENT OF PIPES

  Heat treatment is used to avoid or alleviate the detrimental effects of high temperatures, which are unavoidable during the welding process. The heat treatment required and the recommended temperatures and holding times vary among metals. They are specified in ASME B31.3, Table 331.1.1, Requirements

  Product knowledge February 18, 2022
• Gas Transport in Underground Coal Mines

  Pipeline MaterialMild steel pipes and casing (externally flush) were commonly used since 1940s. They suffer from many drawbacks. Some of them are listed below:1.Very heavy in large sizes (above 5″ in diameter) and liable to hurt workers.2.Must be on floor and prone to get damaged by both floor heavi

  Product knowledge January 07, 2022
• Firewater Distribution System

  When installing a firewater system, consideration should be given to the materials of construction and to the overall layout.Materials of constructionSteel pipe should be used aboveground for firewater lines. Underground piping systems can be constructed of steel, cement-lined steel, or high-density

  Product knowledge February 11, 2022
• Materials of Construction

  Steel pipe is generally used aboveground for firewater lines. Underground piping systems can be constructed of steel, cement-lined steel, or high-density polyethylene (HDPE). Concrete is sometimes used but is seldom economical except in large diameters. HDPE does not corrode, resists accumulation of

  Product knowledge December 31, 2021
• Concrete Application of Welded Pipe

  Welded pipes, are also called welded steel pipes, are made by welding steel. Simple production process, high production efficiency and variety of specification, the welded steel pipes replace gradually the seamless steel pipes in more and more industries.We provide different types of welded steel pi

  Product knowledge December 30, 2021
• Advantage of Steel Door Panels

  Metal door panel is one of the more popular door panels on the market at present, which is avant-garde, fashionable, gorgeous, personalized and a sense of the times.The structure of metal door panel is high-quality medium density board with special treatment, aluminum-magnesium alloy plate, stainles

  Product knowledge February 17, 2022
• STAINLESS STEEL ROUND BARS ADVANTAGES

  Advantages of stainless steel round bars:Good corrosion resistance and machinabilityGood solderability and formabilityHigh strength and light weightSpecifications:Size: 2-400mm;Length: 2-12m;Material Grade: Grade 304; Grade 201; Grade 316l; Grade 430 Use of stainless steel round bars: Decoration, co

  Product knowledge January 20, 2022